How to Install Dummy Door Lever
Installing a dummy door lever is a straightforward process that can enhance the aesthetics of your door and provide a touch of elegance to your home. Whether you’re replacing an old lever or adding a new one to a door without a handle, this guide will walk you through the steps to install a dummy door lever successfully.
Materials Needed:
Before you begin, gather the following materials:
– Dummy door lever kit (including the lever, mounting plate, screws, and possibly a template)
– Screwdriver
– Pencil or marker
– Measuring tape
– Optional: Drill and drill bits (if you need to make any holes)
Step 1: Preparation
1. Clean the door surface where the dummy lever will be installed to ensure a smooth and secure fit.
2. If the kit includes a template, use it to mark the location for the mounting plate. If not, use a pencil or marker to draw a straight line where the lever will be mounted.
3. Measure the distance from the edge of the door to the center of the mark you’ve made. This will help you position the lever correctly.
Step 2: Mounting the Plate
1. Place the mounting plate on the door surface, aligning it with the mark you’ve made.
2. Use the screws provided in the kit to secure the mounting plate to the door. Make sure the plate is level and properly aligned with the door edge.
3. Tighten the screws firmly but do not overtighten, as this may damage the door or the mounting plate.
Step 3: Installing the Lever
1. Position the dummy lever over the mounting plate, ensuring that it is centered and aligned with the mark you’ve made.
2. If the lever has screws on the back, use them to secure the lever to the mounting plate. If not, skip to the next step.
3. Tighten the screws to hold the lever in place, but again, be careful not to overtighten.
Step 4: Final Check
1. Check the lever to ensure it moves smoothly and does not bind or stick.
2. Make sure the lever is level and centered on the door.
3. If everything looks good, you can now enjoy your new dummy door lever.
Conclusion
Installing a dummy door lever is a simple task that can instantly elevate the look of your door. By following these steps and using the right tools, you can have a beautifully finished product in no time. Always remember to take your time and handle the materials with care to avoid any damage to your door or the lever itself.
